Inbal Valves embody a breakthrough in the conceptual design of automatic water control valves. Developed from basic principles, they are free of limitations imposed by the human hand, which characterize conventional control valves such as clapper or diaphragm actuated types. The major concept that led to the development of the Inbal Valve is the N.M.M.P. [...]
Output torque: Quarter turn up to 41000Nm (30258 lbs. ft.), Multi turn up to 9000Nm (6642 lbs. ft.) Type: Quarter turn, multi turn & quarter turn manual override Materials: CI housing, SGI gears, EN19 worm & shaft Mounting flange: IS0 5211, ISO 5210 Specials: Worm & worm shaft as per AWWA C-504
Output torque: Quarter turn up to 12060Nm (8900 ft. lbs) for double acting & 2815Nm (2077 ft. lbs) for single acting spring return Type: Rack & pinion Materials: Aluminum alloy with hard anodized Mounting: IS0 5211 Specials: End stroke adjustment, position indicator, NAMUR mounting features for solenoid valve & limit switch Optional: Different colors end cap
Complies to API 6D, API 594, BDK’s specifications Sizes: 15 mm (1/2″) to 1600 mm (64″) Type: Non-slam, dual plate, wafer & rubber lined Rating: PN 7, PN 10, Class 150 & 300 Materials: CI, DI, WCB, CF8, CF8M Linings: Natural and synthetic rubbers Ends: Wafer & flanged Specials: Very low pressure drop
Complies to BS 5150, BS 5163, BS 5152, IS 14846 Sizes: 25 mm (1″) to 300 mm (12″) Type: Inside screw for sluice, outside screw for gate & globe Rating: PN 10, PN 16 Materials: Cast iron Trim: Bronze, CA15, CF8, CF8M, brass etc Ends: Flanged
Complies to ASME B16.5 Sizes: 15 mm (1/2″) to 300 mm (12″) Type: Equal tee, 45° elbow, concentric reducer, reducing flange etc Rating: Class 150 Materials: DI or CS with lining Linings: PFA / FEP / PTFE
Complies to BS EN 13397, BS EN 593, BS 5353, API 599, BS 5158, BS EN ISO 17292 (BS 5351), BS 5159 Sizes: 15 mm (1/2″) to 600 mm (24″) Type: Diaphragm, butterfly, plug, ball and ball check Rating: PN 6, PN 10 & Class 150 Materials: DI or WCB with lining Linings: PFA / FEP / ETFE / PVDF Ends: Wafer & lugged [...]
Complies to MSS SP-81 Sizes: 50 mm (2″) to 750 mm (30″) Type: Knife edge gate Materials: WCB, CF8, CF8M,CF3, CF3M, CN7M, CD4MCuN etc Ends: Wafer and lugged Specials: Pneumatic actuator, limit switch, solenoid valve, air filter regulator etc Application: Pulp, fibrous, paper pulp, slurries & sludge
Complies to BS EN ISO 15761 (BS 5352), BS 1873 Sizes: 15 mm (1/2″) to 300 mm (12″) Type: Globe (Bellow optional) Rating: Class 300 Materials: WCB, LCB Trim: Monel, Hast-C Ends: Flanged
Complies to BS 5158 Sizes: 15 mm (1/2″) to 200 mm (8″) Type: Plug Rating: Class 125 Materials: Cast iron Ends: Flanged & screwed Specials: Multi-Port
